Welcome to the official website of radium laser!
Your current location:Laser welding machine > News > Corporate News >

How to adjust the mold laser welding machine light microscop

2020-10-19 10:03
How to adjust the mold laser welding machine light microscope

       Mould laser welding equipment are a category of laser welding equipment, also known as laser mould repair machine, the key to its basic principle is to use high working ability of laser single pulse touch for raw materials to carry out the laser welding, laser repair method in small areas such as part of the heating, it is the new method of high precision laser welding. So the adjustment of optical microscope is very harmful to the actual effect of electric welding. During the actual operation of the laser marking machine for abrasive tools,How to adjust the optics of die laser welding machineThe microscopeCan it exceed the actual effect of the best?
 
       Optical microscope is particularly important for laser welding equipment of abrasive tools.How to adjust the optics of die laser welding machineThe microscopeIf see not clear or imprecise, will certainly harm the actual effect of electric welding quality. So what are the adjustments and how do you apply them? The technical engineers came up with their application and adjustment methods.
 
       Optical microscope is particularly important for laser welding equipment of abrasive tools. If see not clear or imprecise, will certainly harm the actual effect of electric welding quality. How to apply and adjust the optical microscope of abrasive tool laser marking machine?
 
       1. Before the actual welding operation, the production scheduling knobs on both sides of the eyepiece barrel of the optical microscope should be rotated clockwise to ensure that the two eyepiece barrels are at the same height to width ratio. It is so that when viewing the steel piece, the picture quality seen by the two nearsighted glasses is highly consistent.
 
       怎样调整模具激光焊接机的光学显微镜

       2. In actual operation, put the steel parts on the working platform, move the operating platform up, down, left, right and center, and observe the steel parts in the optical microscope to make the steel parts in the field of view of the optical microscope in the most clear situation.
       When welding and repairing all the steel parts, the steel parts should be in a clear situation. First, the picture quality should be guaranteed in line with the focal length, height and width ratio of the lens; second, the eyes can clearly see the whole process of welding and repairing so as to ensure the welding quality.
 
       3. During welding repair, it is strongly recommended that the customer must look at the steel parts with two eyes in the application of the optical microscope. The eyes need not be close to the eyepiece or eliminate the eyepiece, which should be maintained at about 5 to 12mm.
       When the field of view cannot be overlapped, the two eyepiece bases of the optical microscope can be adjusted so that the distance between the two eyepieces is consistent with the distance between the two pupil of the optical microscope until the two fields of view are reunited.Laser welding machine for repair weldingIt is often necessary to have two eyes to look at, that is, so that the steel that one sees can be layered. You can see the height of the steel parts, very high precision parts can be seen clearly. Moreover, it can carry out inspection on the steel parts after welding repair, and check whether the welding repair part is bit or ablated, so as to ensure that the welding repair part and the aspect ratio meet the requirements.
Previous:Laser welding machine for repair welding Next:Types and principles of cooling systems in laser welding mac
Related news
Online service Official WeChat